Introduction

The ITABAR Pitot Tube Flow Meter is a velocity-based flow measurement device used to measure the flow rate of fluids (such as gas or liquid) in pipes or ducts.

Applications

HVAC Systems
The ITABAR Pitot Tube Flow Meter measure airflow in ventilation and air conditioning systems.

Oil & Gas
Monitor the flow rate of natural gas, oil, or mixed gases in pipelines and compressors.

Chemical Processing
Measure the flow rate of reactants, chemicals, and gases in reactors, tanks, and pipelines.

Water Treatment
Measure the flow rate of water, wastewater, or slurries in treatment facilities.

Itabar Pitot Tube-IBFD

Itabar Pitot Tube-IBFD-HTG

Itabar Pitot Tube-IBRD

Itabar Pitot Tube-IBFD-HT

Itabar Pitot Tube-FTMD

Itabar Pitot Tube-FTHD

Specification Sheet for Itabar®-Flow-Sensor
The selection of the proper pitot tube sensor can be made quickly and reliably by this manufacturer if the operational data about the existing pipe line,the fluid and the desired version are made available according to the table below.
General Information:
Client:

Reference-No.:

TAG-No.:


Pipeline:
Material:		Nom. Pressure: psi g
Pipe inside diameter: Inch Wall thickness insulation: Inch		Wall thickness: Inch
Fluid:
Name	liquid ☑ steam □ gas □
Isentropic exponent:
Compressibility factor:
Pipe run:	horizontal□ vertical □
Flow direction:	from right to left ☑ from left to right ☑
	upwards ☑ downwards ☑ bi-directional ☑

Physical value	Min.		Operation	Max.	Unit
Flow:
Temperature:
Pressure; abs. ☑ rel. ☑
Standard density:
Operational density:
Dynamic viscosity:
Requested version:
Special pipe assembly with threaded weld-0-let: ☑ Special pipe assembly, flanged version: ☑ -DIN-Flanges: ☑ -ANSI-Flanges: ☑ Wet-tap version of ltabar-sensor required: ☑ Compact version(if technically possible): ☑

Itabar Pitot Tube

Itabar Liquid and Gas Flow Sensors are designed to operate in environments with temperatures up to 1175°C and 400 bar pressure. Various designs and materials can be selected to adapt customers requirements.

Itabar Pitot Tube-IBR

Itabar Pitot Tube-IBF

Itabar Pitot Tube-IBF-100

Itabar Pitot Tube-FTN

Itabar Pitot Tube-FTM

Itabar Pitot Tube-FTH

Specification Sheet for Itabar®-Flow-Sensor
The selection of the proper pitot tube sensor can be made quickly and reliably by this manufacturer if the operational data about the existing pipe line,the fluid and the desired version are made available according to the table below.
General Information:
Client:

Reference-No.:

TAG-No.:


Pipeline:
Material:			Nom. Pressure: psi g
Pipe inside diameter: Inch Wall thickness insulation: Inch			Wall thickness: Inch
Fluid:
Name	liquid ☑ steam □ gas □
Isentropic exponent:
Compressibility factor:
Pipe run:	horizontal □ vertical □
Flow direction:	from right to left ☑ from left to right ☑
	upwards ☑ downwards ☑ bi-directional ☑

Physical value		Min.		Operation	Max.	Unit
Flow:
Temperature:
Pressure; abs. ☑ rel. ☑
Standard density:
Operational density:
Dynamic viscosity:
Requested version:
Special pipe assembly with threaded weld-0-let: ☑ Special pipe assembly, flanged version: ☑ -DIN-Flanges: ☑ -ANSI-Flanges: ☑ Wet-tap version of ltabar-sensor required: ☑ Compact version(if technically possible): ☑