-
Vortex Flow MeterVortex Flow Meter for liquid, steam and gas flow measurement- Diameter range: DN15 ~ DN300 (1/2 ~ 12)- Measuring range: Liquid: 0.2 ~ 2100 m³/h (0.15 ~ 1520 ft³/min) Steam & Gas: 1.5 ~ 28000 m³/h
-
Turbine Flow MeterHigh precision, typically ±0.5%R or ±1.0%R (R refers to reading error). Good repeatability, short-term repeatability can reach 0.2%~0.05%. Output pulse frequency signal, suitable for total quantity
-
Metal Tube Float FlowmeterMeasurement range: Water (20℃) (1~200000) L/h Air (20℃, 0.1013MPa) (0.03~3000) m³/hRange ratio: Standard type 10:1, special type 20:1Accuracy: 1.5Pressure: Standard type: DN15 to DN50 ≤ 4.0MPa, DN80
-
Magnetic Flow MeterLine Size: ½-36 inch (15-900 mm)Liner Material: PTFE, ETFE, PFA, Polyurethane, Neoprene, Linatex Natural RubberElectrode Material: 316L Stainless Steel, Nickel Alloy, Platinum, Tantalum,
-
Ultrasonic Flow MeterThis inline ultrasonic flow meter measures liquid flow with excellent repeatability. Built with corrosion-resistant materials, it supports touch display, remote monitoring, universal power supply and
-
Ultrasonic Clamp-on FlowmeterPipe diameter:15 to 100mm; 50 to 700mm; 15 to 100mm; 50 to 700mm; 300 to 6000mmWorking frequency:1MHzMedium turbidity:≤20000ppmAccuracy:±1%Measurement period:500ms
The ONICON F-4300 Clamp-on Ultrasonic Flow Meter utilizes the differential transit time method to measure the velocity of relatively clean liquids in full pipes. By measuring the difference between...
Feejoy Clamp-on, Ultrasonic Flow Meter is based on the thermal principle. The sealed probe contains two resistors, one of which is not heated as the detection resistor, and the other is not heated as...
FLEXIM – Ultrasonic Clamp-on Flow Meter Manufacturer Advanced Meter Verification (AMV) – our brand-new onsite verification solution for your FLUXUS. Learn how you can benefit from...
Oct 11, 2021 · The clamp on ultrasonic flow meter is a type of flow meter that works using ultra sound and the installation method is simply by clamping it on the surface of the pipe. What is...
F600 Clamp on type ultrasonic flowmeter BTU Meter F600 adopts a new external clamp design, which could get the flow rate without touch the measurement medium. Compared with other traditional flow...
Tek-Clamp 1200A Ultrasonic Clamp On Flow Meter is designed to measure the fluid velocity of liquid in a full or closed pipe. It is a measurement system which is both easy to install and use. The...

