Magnetic level gauges work on the principle of communicating vessels, therefore the level in the measuring chamber will be the same as the level in the vessel. The measuring chamber is fitted with a float, which has a magnet inside. The float with magnet will float on the medium and the magnet in the float will turn the flaps of the indicating rail.
The flaps of magnetic level gauges
Each flap in the indicating rail is fitted with a permanent magnet which makes our level gauge unaffected by shocks, vibrations and high temperatures. Also moisture and / or an aggressive environment are no problem for this level gauge.
This magnetic level gauge is available with a full plastic indication rail or with stainless steel flaps in a aluminium or stainless steel 316 housing.
Because of the construction of the flaps, one side white and on the other red / orange it is possible to see the level over a greater distance or in darker places.
With the available "Pointers" it is possible to set the visual limits on the indicating rail on every level you require.
When the magnetic level gauge is fitted with magnetic switches it is possible to get a signal. With more switches you can make a pump control (pump on / off) and / or create a high / low alarm. Beside or instead of level switches a reedchain transmitter can be mounted, this reedchain has an standard output signal of 4-20 mA.
Magnetic level gauge are also suitable for interface reading. The float will sink into the medium with the lower density and will float on the medium with the higher density.
The advantages of magnetic level gauges
Standard unpressurised floatsystem
Float without mechanical or magnetic guide rails
Fully corrosion resistant system
Measurement is unaffected by pressure, vacuum, temperature, foam and viscosity
Minimum sensitivity to density variations
Permanent indication without external power supply
Low temperature version is fitted with ice free indication strip
Unique free view indication rail in plastic, Aluminium or full SS 316
Fully adjustable switches
Eccentric drain cannot blocked by the float
Safe, environmentally friendly and maintenance-free construction
Broken float indication rail is possible
Special designs according to client wishes are possible
You are doing business directly with the manufacturer, reducing transfer mistakes
For most types all our weldings are fully penetrated.
Low installation, maintenance, and engineering costs
Safe and reliable installation and operation
Custom-designed float ensures accurate and reliable indication
Industries served:
Refinery and chemical industries
Energy and power plant technology
Feed water heaters and boilers
Offshore exploration and drilling
Pipeline compressor applications
Pulp and paper
Food and beverage
Pharmaceutical
Oil and Gas
Petrochemical
Power Generation
Water and wastewater treatment
Semiconductor

